| ND/SMCD/CVD Wire dies |
TC wire dies |
Shaped wire dies |
Tube bush and dies |
PCD wire dies |
CBS wire dies |
Extrusion tips and dies |
Cold heading dies |
Recuting or repolishing dies |
| Case size* |
Case sizes* |
Drawing of hole* |
Bush/plug or dies* |
Case size* |
Case size |
Drawing |
Drawing* |
Old size and new size* |
| Hoel diameter* |
Hole diameter* |
Case sizes* |
Tube material* |
Hole diameter* |
Hole diameter* |
With or without insert for tips* |
Material* |
Tolerance* |
| Tolerance* |
Tolerance* |
Tolerance* |
Drawing or required sizes* |
Tolerance* |
Tolerance* |
What insert for tips, ND or PCD or TC* |
Application |
Redution angle |
| Reduction angle |
Content of cobalt |
Sharp or corner* |
Material* |
Reduction angle |
Reduction angle |
Mateiral of tips and dies* |
Quatity per drawing” |
Bearing length |
| Bearing length |
Wire material* |
Corner radius” |
Toleracne” |
Bearing length |
Bearing length |
With or without insert for dies* |
|
Wire material* |
| Wire material* |
Quantity each size* |
Wire material |
Quatity each size* |
Wire material* |
Wire material* |
Hardness in HRC* |
|
Quatity* |
| Quantity each size* |
The height and diameter of nibs |
Reduction angle |
|
Quantity each size* |
Quantity each size* |
Quatity* |
|
How to mark |
| Finished or only drilled dies* |
How to mark |
Bearing length |
|
Finished or only drilled dies* |
Max entrance angle |
How to mark |
|
|
| Input wire* |
|
Blanks sizes |
|
Blanks number |
TC or PCD* |
|
|
|
| Elongation or reduction percentage |
|
Input wire profile and sizes* |
|
Input wire* |
How to mark |
|
|
|
| How to mark |
|
Other required sizes and detailed |
|
Elongation or reduction percentage |
|
|
|
|
|
|
How to mark |
|
How to mark |
|
|
|
|
