| Item | Soft wire product | Hard wire product |
| Bell angle (α) | 70°±20° | 60°±20° |
| Approach angle (β) | 35°±5° | 30°±5° |
| Reduction angle (γ) | 18°±2° | 12°±2° |
| Bearing length (D) | 20-50 | 40-60 |
| Back relief angle(θ) | 20-50 | 15°±5° |
| Exit angle (φ) | 50°±20° | 50°±20° |
| Wire type/Die range mm | 0.010 | 0.025 | 0.05 | 0.10 | 0.20 | 0.40 | 0.80 | 1.60 | 3.20 | 6.40 | 12.80 | 22 |
| Stainless steel | ND | ND | ND | ND | ND | ND | ND | |||||
| Stainless steel | PCD | PCD | PCD | PCD | PCD | PCD | PCD | PCD | ||||
| Tungsten/Molybdenum | ND | ND | ND | ND | ND | ND | ||||||
| Tungsten/Molybdenum | PCD | PCD | PCD | PCD | PCD | PCD | PCD | PCD | ||||
| Bare copper | ND | ND | ND | ND | ND | ND | ND | |||||
| Bare copper | PCD | PCD | PCD | PCD | PCD | PCD | PCD | |||||
| Aluminlum | ND | ND | ND | ND | ||||||||
| Aluminlum | PCD | PCD | PCD | PCD | PCD | PCD | PCD | |||||
| Brass covered steel | ND | ND | ||||||||||
| Brass covered steel | PCD | PCD | PCD | PCD | ||||||||
| Copper coated steel | ND | |||||||||||
| Copper coated steel | PCD | PCD | PCD | PCD | ||||||||
| Tinned copper | ND | ND | ND | ND | ND | |||||||
| Tinned copper | PCD | PCD | PCD | PCD | ||||||||
| Gold/Platinum | ND | ND | ND | ND | ND | ND | ND | |||||
| Gold/Platinum | PCD | PCD | PCD | PCD | PCD | |||||||
| Bunch wire | ND | ND | ND | |||||||||
| Bunch wire | PCD | PCD | PCD | PCD | PCD | PCD | PCD |
